skule.sormo.no

Kort: NodeMCU 1.0 (ESP8266 Modules)
Programmeres med micro USB tilkobling

This is D1 mini, it is a mini WIFI board based on ESP-8266EX.
11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)
1 analog input(3.3V max input)
a Micro USB connection
Compatible with；check here
Compatible with ；check here

How to get started in Arduino:

Setup driver
Before you use miniD1 boards, you need setup CH340g driver.

Python
On Windows you need install Python 2.7.10.
On Linux & MAC OSX, you don't need install it, comes preinstalled with OS.

Installing Hardware package
There is two ways to install hardware package, Boards Manager or GIT

Installing with Boards Manager
Starting with 1.6.4, Arduino allows installation of third-party platform packages using
Boards Manager. We have packages available for Windows, Mac OS, and Linux (32 and 64 bit).
<1>. Install Arduino 1.6.7 from the Arduino website.
<2>. Start Arduino and open Preferences window.
<3>.Enter https://arduino.esp8266.com/stable/package_esp8266com_index.json
into Additional Boards Manager URLs field. You can add multiple URLs, separating them with commas.
<4>. Open Tools→Board:xxx→Boards Manager and install esp8266 by ESP8266 Community (and don't forget to select your ESP8266 board from Tools > Board menu after installation).

Installing with GIT (Recommend):
We recommend using GIT to install Hardware package, you can always get the latest version of it.