skule.sormo.no

{jcomments on}Icom IC-735 HF transceiver er en SSB/CW/AM/FM sender/mottaker fra 180 tli 10 meter bølgelenger. Effekt ut er mellom 10-100 watt.,
 IC 735 (Service manual), 

Radioen fjernstyres med USB til serie-kabel til Logger32 med baudrate 1200 og adressekode 04 for radioen. Konfigurering av remote control

http://www.hampedia.net/icom/ic-735.php 

Endre baudate:

Mike, K7MH provided you a very good link for your computer control issue, HOWEVER note that you may have 2 issues to deal with.
Are you really asking Where is J22 - in this Icom 735 radio?

J22 is on the PL board inside the Icom IC-735 UNDER the Power Amplifier (PA) unit. 
To gain access you need to remove the top cover and the 4 screws attaching the PA
You can set aside the PA unit by disconnecting the power cable to the PA unit.
CORRECT reassembly -- PATIENCE REQUIRED (not shorting or pinching cables) is required to have a FUNCTIONAL Radio (and avoid damage).

When GI0ZGB removed his Icom IC-735 case covers to change the baud rate from 1200 to 9600 
he had to remove the substantial heatsink to access J22 - THAT may be a bit much for a borrowed radio and your experience.
http://www.eham.net/reviews/detail/381?page=1

1. You original question 1200 -> 9600 baud
# IC-735 using address 04 hex and 9600 bps.

The second issue is the Icom CI-V network (which is also addressed on that same web page)
2. Proper settings for the Icom CI-V network 
# Almost every rig requires an ICOM CT-17 CI-V interface or compatible. A great list of CI-V interfaces can be found at the website from Ekki Plicht, DF4OR.

Ref:http://forums.qrz.com/index.php?threads/how-to-change-the-baud-rate-of-an-icom-735.159273/